Lam Research Corporation designs, manufactures, markets, refurbishes, and services semiconductor processing equipment used in the fabrication of integrated circuits worldwide. The company offers thin film deposition products, including SABRE electrochemical deposition products for copper damascene manufacturing; ALTUS systems to deposit conformal atomic layer films for tungsten metallization applications; VECTOR plasma-enhanced chemical vapor deposition (CVD) and atomic layer deposition systems to deposit oxides, nitrides, and carbides for hardmasks, multiple patterning films, anti-reflective layers, multi-layer stack films, and diffusion barriers; and Striker atomic layer deposition systems that deliver conformal dielectric films for spacer-based patterning and liner applications in various advanced memory and logic structures. Its thin film deposition products also comprise SPEED high-density plasma CVD products for applications in shallow trench isolation, pre-metal dielectrics, inter-layer dielectrics, inter-metal dielectrics, and passivation layers; and SOLA ultraviolet thermal processing products for treatment of back-end-of-line (BEOL) low-k dielectric films and front-end-of-line silicon nitride strained films. In addition, the company offers plasma etch products, such as Kiyo that provide solutions for conductor etch applications; Versys metal products, which offer a platform for BEOL metal etch processes; Flex for dielectric etch applications; and Syndion to address various through-silicon via etch and complementary image sensor etch applications. Further, it provides single-wafer clean products comprising EOS, Da Vinci, DV-Prime, and SP series products for wet etch and clean applications in wafer-level packaging; and Coronus plasma-based bevel clean products to enhance die yield by removing particles, residues, and unwanted films from the wafer's edge, as well as legacy products. The company was founded in 1980 and is headquartered in Fremont, California.
@AnthonyJackson your chart analysis is welcomed & appreciated here, but just one user login allowed here. Also, I would appreciate if you would reply back to this post as I want to make sure you are not some copy paste kind of poster...thx
Lam Research Corporation designs, manufactures, markets, refurbishes, and services semiconductor processing systems used in the fabrication of integrated circuits. It provides thin film deposition products, including SABRE electrochemical deposition products for copper damascene manufacturing; ALTUS systems to deposit conformal atomic layer films for tungsten metallization applications; VECTOR plasma-enhanced chemical vapor deposition (CVD) and atomic layer deposition systems to deposit oxides, nitrides, carbides, multiple patterning films, anti-reflective layers, multi-layer stack films, and diffusion barriers; SPEED high-density plasma CVD products for applications in shallow trench isolation, pre-metal dielectrics, inter-layer dielectrics, inter-metal dielectrics, and passivation layers; and SOLA ultraviolet thermal processing products for the treatment of back-end-of-line low-k dielectric films and front-end-of-line silicon nitride strained films. The company also offers plasma etch products, such as Kiyo products that provide solutions for conductor etch applications; Flex products, which offer technologies and application-focused capabilities for dielectric etch applications; and Syndion products that provide solutions to address various through-silicon via etch applications. In addition, it provides single-wafer clean products, including EOS, Da Vinci, DV-Prime, and SP series products for wet etch and clean applications in wafer-level packaging, including silicon substrate thinning, wafer stress relief, underbump metallization etch, and photoresist removal; and Coronus plasma-based bevel clean products to enhance die yield by removing particles, residues, and unwanted films from the wafer's edge, as well as legacy products. The company offers its products in the United States, Europe, Taiwan, Korea, Japan, China, and Southeast Asia. Lam Research Corporation was founded in 1980 and is headquartered in Fremont, California.
Today's ER beats estimates & provided a strong guidance. I doubt it is going to a correction. I think it is hitting a new high soon.
Chip maker Lam Research ($LRCX) is also likely to see early strength after reporting fiscal third quarter results that exceeded analyst estimates on both the top and bottom lines.
I've been here since 132. Buy this BEAST at any price Will be 300 sometime next year . Don't look for dips. Terrific guidance
